For pools up to 85,000 litres
Built-in automatic chlorine detection
10 Adjustable Power Levels: built-in ability to control chlorine production
Easy-To-Use Control Box: 3 buttons and 4 lights for operation; conveniently mounts to the pool or the spa’s skirt
Cell simply drapes over the side of the pool/spa into the water (in-line kit available)
Automatic Cleaning: polarity reverses periodically to clean and help reduce calcium build-up
Salt Level Indicator Technology: lets you know when to add salt to maintain or boost chlorine production
Boost Mode allows for manual control
3,000 to 4,000 PPM salt concentration
Easy-To-Clean Cell
No pool/spa modifications required, and pool/spa does not need to be turned on
15 foot power cord, 15 foot cell cord
Supports 220 VAC supply voltages; also supports low voltage 12 VDC
High Current Shutdown to protect the power supply and titanium plates if there is too much salt
The MegaChlor-CD has chlorine detection built directly into the cell, meaning that it doesn't need to run on a 3-hour cycle (like the MegaChlor), which could lead to over-chlorination if spa usage drops. The MegaChlor-CD would be on for 45 minutes and then off until more chlorination is needed, whether that would be 1 hour or 6 hours.
SHIPPING: Courier with tracking New Zealand $7.50, rural (RD addresses) $12.50
Similar Product
The MegaChlor without chlorine detection. The MegaChlor would be on for 45 minutes and then off for 2 hours and 15 minutes.