Complete Salt Water Chlorine Generator System
Availability: Stock.
Product Description: Complete standalone salt water Chlorine Generator system which includes the Control Centre, CE compliant Power Supply (different from the USA unit in the pictures), Salt Water Cell, Cell Cleaning Tube, plus standard Water and Salt test strips. Suitable to convert most non-salt water based Spa Pools to a mild salt water system. Check with us for suitability of your Spa.
By installing this system you will enjoy crystal clear Spa water, elimination of chlorine smells, reduced incidents of Spa Rash, and longer time between Spa water changes when you use our simple maintenance regime. Overall Spa running costs will be reduced through savings in not having to regularly use “balanced chlorine” granules, or other branded sanitising products.
The included 230VAC input/5.5VDC output power supply is CE compliant, and suitable for use in New Zealand. It is not water-proof, but has proven reliable when installed in the Spa Pump and Controller enclosure. It is recommended that power input is taken from the main power input to your Spa. This would normally be completed by a registered electrician.
If you wish to install the power supply in an alternative location, an optional high quality IP66 enclosure is available with the power supply already fitted, along with a 3m power cable and 3 pin plug. The additional cost is $180 + GST. It is also possible mount the Chlorine Generator controller in this enclosure.
Product Use: Tired of slaving over your Spa Pool, buying expensive chemicals and dealing with un-helpful people? We have you covered and will help you get the experience you are looking for. The Ultimate Spa Pool Experience!
The Hot Tub Wizard Salt Water Chlorine Generator System allows you to easily convert any Spa Pool to mild saltwater based sanitisation. We have found that salt levels below 2,000 ppm with hardness of 250-350 does not cause corrosion like other systems requiring higher salt levels. This salt spa system produces a pure chlorine sanitizer by electrolysis of natural salt (NaCl). Salt is converted to chlorine to sanitize your water, then the chlorine recycles back to salt. The amount of salt needed is low (1500 ppm) and does not require expensive salts or corrosion anodes. Installs in less than an hour.
Product Notes: For Spa Pools up to 3500 litres, or swim spas up to 9500 litres. Easy install and comes with adapter cord allowing power to be supplied at spa pack. 120/240 VAC, 50/60 Hz, 8' cell cable. Best in class 60 day satisfaction and 1-year full, no hassle warranty, plus world class technical support.
The included SCEPTER salt water cell is designed to be placed OUTSIDE the filter for optimum performance and life.
